THINGS YOU SHOULD PAINT INSTEAD OF REPLACE TO SAVE MONEY
You know a fresh coat of paint can give any room a quick and inexpensive facelift. But did you know that a little paint can also perk up carpets, appliances, and even vinyl floors? Basically, if it doesn’t move, you can paint it. But only after you’ve paid special attention to prep — cleaning, patching, and sanding (generally) the area.
Painting isn’t brain surgery, but it’s not a breeze, either. Here are some rules of thumb:
Prime before painting. Primer will allow the paint to adhere better.
Most hard surfaces will take primer better if they’re roughed up a little with fine-grade sandpaper.
When using spray paint, multiple, thin layers are better than one, thick coat. Ease up on your trigger finger, and spray in short bursts.
Wait for the previous coat of paint or primer to dry completely before adding another coat.
Door, Drawer, and Cabinet Hardware
Spray paint can turn builder-grade brass locks and hinges into fashion-forward hardware with an oil-rubbed bronze, pewter, or stainless look.
Clean hardware with a fine steel wool to remove grease and grime.
Rough up the surface with fine-grain sandpaper.
Before you paint, insert a tiny strip of painter’s tape into the keyhole to make sure paint doesn’t gunk it up.
Prime with a metallic primer, then paint with metallic spray paint.
Insert the door lock’s spindle into a square of Styrofoam, which will hold it upright while you spray around the knob.
When you paint your red brick fireplace, you transform the entire room. But beware! Once you paint brick, it’s nearly impossible to return it to the original brick color. You can paint brick a single color, or achieve some variation — like the variations in real brick — by sponging on slightly lighter and darker hues.
Lightly sand away any loose bits of brick or mortar with 120-grit sandpaper.
Clean dirt and soot with a wire brush and heavy-duty cleanser.
Allow to dry completely before applying an oil-based, stain-blocking primer.
Paint with a semigloss latex.
Never paint the firebox.
Brick is porous and drinks paint, so buy twice what you think you’ll need.
Wear safety glasses and gloves when cleaning anything with a metal brush.
Imagine how sweet it is to update ceramic tile without having to bust up and cart away tons of old tile. Play it safe and avoid painting tiles in high-traffic and high-moisture areas. Some good places are laundry room floors, backsplashes under cabinets (but not above ranges where pasta sauce splatters), and walls around tubs you rarely use.
Repair cracked or chipped tile with caulk or grout before painting.
Give patching material ample time to dry, then lightly sand before applying an epoxy or urethane bonding primer.
Sand after priming and between each coat of quality latex paint.
Wait several days for the paint to cure completely, then seal with two or three coats of clear, water-based polyurethane.
To get a smooth look, apply paint in zigzags, then roll down in one, smooth motion.
Use 240-grit wet/dry sandpaper for prep and between coats.
Don’t forget safety goggles and masks when sanding tiles.
Drywall Paper Repair Tips
The brown paper is the inner core of the layered paper that surrounds the gypsum core of common drywall. If you coat this paper now with joint compound you WILL GET BLISTERS. The torn paper area of the drywall has been trimmed and it’s ready to be coated with a sealer (see below) and then repaired.
was removing an ugly ceramic tile backsplash in my kitchen. Some of the drywall paper came off with the old glue. It looks horrible. A home center employee told me I have to put in new drywall. This can’t be true. Is there a way to repair this so the wall is once again perfectly smooth? Surely you know secret ninja tricks that will save me
never forget the first time that happened to me. I was removing large sheets of thin wood paneling that had been nailed and glued over unpainted drywall. Oh my goodness, what a mess I had. The second time it happened to me, I was stripping off wallpaper in a bathroom. The paper hanger didn’t prime the drywall with the proper sealant to prevent the wallpaper glue from bonding to the drywall paper.
First, the advice you received from the home center employee is completely wrong. You don’t have to replace the drywall. I’m going to describe to you how to repair it. It’s a shame that so much bad advice is dispensed each day inside those big box stores.
The common drywall that’s found in many homes is made with high-technology paper. You’d be surprised how thick the actual paper is. You can see it if you look closely at a cross section of drywall after it’s been cut or at the end of a piece before it’s installed.
Things to Know When Painting Your Home Exterior
The exterior of your home is very important, but can be quite challenging to maintain. Before guests and potential homeowners step into a home, it is often times the first aspect they see.
Quality Over Cost
Purchasing better quality exterior paint will save you the labor of painting more than once or twice throughout the year. Along with saving your time and energy, better quality paints are readily available, allowing for paint color to last longer. Working with a professional exterior painter will give you access to a number of recommended paint brands at a cost that suits your budget best.
Mother Nature Is Your Indicator
Planning ahead is beneficial in life, especially when you are planning to paint your home’s exterior. Not only is it the first aspect that guests see, but it is also one of the elements in your home that is exposed to the outside world. As you plan to paint, check out your local weather patterns. It is better to paint in the dry times of the year so that your paint has time to dry properly.
Check The Health Of Your Siding
Before you start painting, inspect your siding’s current condition. You do not want to paint on siding that‘s already worn down, as it poses as a hazard and may fall off sooner rather than later. Replacing the siding with new components and painting it afterwards will ensure it withstands the elements for a longer period of time.
Prep The Space Around You
Don’t forget to prep the space around you! Painting can be very messy sometimes and may splash onto the area around you if it’s not properly covered and weighed down.
Drywall: Drywall Repair & Painting
If you paint the wall, you own the wall. That’s the prevailing attitude of general contractors and customers when a painting contractor tackles a job. Contrary to their beliefs, however, you know that paint can’t cover up poor drywall work. If you’re faced with an iffy proposition, do you know what to do?
Who’s responsible for the drywall? does a lot of work in new construction settings, both commercial and residential. In this arena, there is typically a separation of responsibilities: The drywallers are responsible for their work and the painting contractor is responsible for painting. Still, based on his prior experience
“I’ll take a visual look and if I see there are some areas that need to be addressed — joints not feathered well or raised spots — and I’ll point them out to the general contractor. Someone has to address those before I start painting.”
Some painting contractors may not want to cause a fuss, fearful of possibly losing future work. What you may not realize is that some of this may already be addressed in a job’s specifications. “A lot of painters don’t read the specs very well — somewhere there are specs on painting and drywall,”
suggests that painting contractors can use two established guidelines to help them in assessing drywall surfaces before they paint them: the drywall finishing standards based on GA-214-96 in the Gypsum Construction Handbook and PDCA Industry Standard P4-04, which addresses responsibility for inspection and acceptance of surfaces prior to painting and decorating.
Common Causes For Drywall Repairs
Just like how we have to go to the doctor every once in a while, our houses also have to go under repair every so often. From small touch ups to large scale renovations, there are a slew of things that can be done to make your house comfortable to live in and always seem to be brand new.
Superficial scratches are one of the most commonplace causes for drywall repairs. Homeowners with small children or people who move large furniture around are most likely to encounter this problem. Scratches may be as shallow as the paint layer or go on deeper to the paper layer of the sheet. This problem is remedied by having the damaged area covered with joint compound and having it sanded before getting a new paint job.
This type of wall damage is something in between a scratch and a hole. Surface bruises are carved out parts of the wall that are deeper than superficial scratches but do not go all the way through the board. Unlike in repairing scratches, a fiber glass mesh is needed in combination with the joint compound to effectively repair the drywall. Instead of just one, two applications are necessary to even out the surface and make sure that it does not worsen into a hole. After drying, sanding and priming is done before it is painted.
Another common cause for drywall repairs would be the presence of holes. Smaller holes created by nails or other objects can be repaired in the same way as scratches. Medium-sized holes require the use of metal plates or aluminum plates to support the damaged area of the wall before it is smoothed over with a joint compound, sanded, primed, and painted.
The worst type of damage would be that caused by water or flooding. The best way to repair this is to have the damaged boards cut out and have new ones reinstalled. Horizontal installation of drywall is commonly used for this type of repair because it is easier to make the wall even and avoid distortion.